Tools, Hand & Power

Having the right tool for the right job makes life a lot easier. Our Tools and Abrasives Department is committed to helping you keep your tool crib stocked with the right products to meet your needs. We have on-hand and ready to ship a great assortment of power and hand tools, as well as a full line of blades, wheels, bits and other accessories. We also have a wide range of drills, taps, dies and reamers to satisfy your metalworking needs. Also, take a look at our plentiful stock of finishing and grinding products. Contact us by email or shop online in our Tools or Abrasives Departments.

Marksman Soldering Iron, SP23

Marksman Soldering Iron, SP23
Fine quality consumer mini-iron, 8-1/4 inches (210 mm) long, Featherweight iron with pencil handle, Ideal for hobbies, kits, radios and electronics work, Includes MT1 1/8-inch (3 mm) diameter replaceable nickel-plated copper tip, Develops 750F degrees (400C degrees), Stainless steel barrel, heat and impact resistant handle, UL listed, CUL-listed model available, IMPORTANT: Use only Weller tips. Use of non-Weller components may void product warranty if the non-Weller component causes damage to the unit.
Specifications: Voltage: 120
Wattage: 25
Hz: 50/60
Shelf Pack Weight: 5-1/8 lbs. (2.5 Kg)
Shelf Pack: 6
RSC # Vendor Part Number Description Unit of Measure Brand Names
09500110 47368 SOLDERING IRON SP23 EA Cooper Tool
Share |

Related Products:

  1. Professional Series Soldering Iron, WP25 7-7/8 inches (200 mm) long Ideal...
  2. Professional Stained Glass Soldering Iron, W100PG Top quality iron for the handyman...
  3. Replacement Tips for Soldering Guns Tips compatible with Weller soldering guns,...
  4. Professional Soldering Gun, D550 Professional all-purpose gun, Pistol grip design,...
  5. Heavy Duty Soldering Iron, Series 115 Hexacon’s Heavy Duty series of Plug-Tip...

Slugger Cutters, ¾” Diameter Shank Drives

Slugger Cutters, ¾” Diameter Shank Drives
Slugger Cutters, ¾” Diameter Shank Drives
Save time and reduce cost by using Jancy’s Slugger cutters, With their unique, centerfree design, they cut only the outside periphery of the hole, ejecting the remaining center as a slug. Regardless of diameter, they produce reamed quality burr-free holes in one operation, eliminating costly pilot holes and step drilling. Holes on curved surfaces are easily produced without distortion. These techniques greatly reduce torque and horsepower requirements and chip load per tooth, meaning the cutters last longer and have a higher rate of penetration.
Specifications: Pilot Fits Cutter Sizes
Pilot #16001: 1” depth, ½” diameter and smaller
Pilot #16002: 2” depth, ½” diameter and smaller
Pilot #16003: 1” depth, 9/16” diameter and smaller
Pilot #16004: 2” depth, 9/16” diameter and smaller
RSC # Vendor Part Number Description Unit of Measure Brand Names
07601100 S4375 CUTTER 7/16X1 EA Jancy Engineering
07601105 S5625 CUTTER 9/16X1 EA Jancy Engineering
07601110 S6250 CUTTER 5/8X1 EA Jancy Engineering
07601115 S6875 CUTTER 11/16X1 EA Jancy Engineering
07601120 S7500 CUTTER 3/4X1 EA Jancy Engineering
07601125 S8125 CUTTER 13/16X1 EA Jancy Engineering
07601130 S8750 CUTTER 7/8X1 EA Jancy Engineering
07601135 S9375 CUTTER 15/16X1 EA Jancy Engineering
07601140 S1000 CUTTER 1X1 EA Jancy Engineering
07601145 S1062 CUTTER 1-1/16X1 EA Jancy Engineering
07602095 SL437 CUTTER 7/16X2 EA Jancy Engineering
07602105 SL562 CUTTER 9/16X2 EA Jancy Engineering
07602125 SL812 CUTTER 13/16X2 EA Jancy Engineering
Share |

Related Products:

  1. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  2. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  3. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  4. Slugger Portable Drilling Machine, #JM101 The JM101’s durable lightweight design increases...
  5. Slugger Industrial Arbor, #3MT Jancy’s industrial arbors are designed to...

Slugger Cutters, ¾” Diameter Shank Drives

Slugger Cutters, ¾” Diameter Shank Drives
Slugger Cutters, ¾” Diameter Shank Drives
Save time and reduce cost by using Jancy’s Slugger cutters, With their unique, centerfree design, they cut only the outside periphery of the hole, ejecting the remaining center as a slug. Regardless of diameter, they produce reamed quality burr-free holes in one operation, eliminating costly pilot holes and step drilling. Holes on curved surfaces are easily produced without distortion. These techniques greatly reduce torque and horsepower requirements and chip load per tooth, meaning the cutters last longer and have a higher rate of penetration.
Specifications: Pilot Fits Cutter Sizes
Pilot #16001: 1” depth, ½” diameter and smaller
Pilot #16002: 2” depth, ½” diameter and smaller
Pilot #16003: 1” depth, 9/16” diameter and smaller
Pilot #16004: 2” depth, 9/16” diameter and smaller
RSC # Vendor Part Number Description Unit of Measure Brand Names
07601050 16001 PILOT PIN 7/16-1/2X1 EA Jancy Engineering
07601055 16003 PILOT PIN 9/16+ X 1″ (1/4) EA Jancy Engineering
07601060 16004 PILOT PIN 9/16+X2 EA Jancy Engineering
Share |

Related Products:

  1. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  2. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  3. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  4. Slugger Portable Drilling Machine, #JM101 The JM101’s durable lightweight design increases...
  5. Slugger Industrial Arbor, #3MT Jancy’s industrial arbors are designed to...

Slugger Industrial Arbor, #3MT

Slugger Industrial Arbor, #3MT
Slugger Industrial Arbor, #3MT
Jancy’s industrial arbors are designed to quickly and easily adapt Slugger cutters to most types of conventional and CNC machinery. Slugger industrial arbors and cutters increase the versatility and capacities of most machines. Industrial arbors have spring-loaded slug ejection systems and are available with coolant inducers to provide proper cooling to the interior of the cutters.
Arbor #1A3MT is for a ¾” shank drive and features a #3 Morse Taper with coolant inducer.
RSC # Vendor Part Number Description Unit of Measure Brand Names
07601040 IA3MT ARBOR #3MT EA Jancy Engineering
Share |

Related Products:

  1. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  2. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  3. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  4. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  5. Slugger Portable Drilling Machine, #JM101 The JM101’s durable lightweight design increases...

Slugger Cutters, ¾” Diameter Shank Drives

Slugger Cutters, ¾” Diameter Shank Drives
Slugger Cutters, ¾” Diameter Shank Drives
Save time and reduce cost by using Jancy’s Slugger cutters, With their unique, centerfree design, they cut only the outside periphery of the hole, ejecting the remaining center as a slug. Regardless of diameter, they produce reamed quality burr-free holes in one operation, eliminating costly pilot holes and step drilling. Holes on curved surfaces are easily produced without distortion. These techniques greatly reduce torque and horsepower requirements and chip load per tooth, meaning the cutters last longer and have a higher rate of penetration.
Specifications: Pilot Fits Cutter Sizes
Pilot #16001: 1” depth, ½” diameter and smaller
Pilot #16002: 2” depth, ½” diameter and smaller
Pilot #16003: 1” depth, 9/16” diameter and smaller
Pilot #16004: 2” depth, 9/16” diameter and smaller
RSC # Vendor Part Number Description Unit of Measure Brand Names
07601053 16002 CENTER PIN EA Jancy Engineering
Share |

Related Products:

  1. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  2. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  3. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  4. Slugger Portable Drilling Machine, #JM101 The JM101’s durable lightweight design increases...
  5. Straight Tooth Woodruff Keyseat Cutters Keo Cutters uses the latest technologies...

Slugger Portable Drilling Machine, #JM101

Slugger Portable Drilling Machine, #JM101
Slugger Portable Drilling Machine, #JM101
The JM101’s durable lightweight design increases drilling production while reducing operator fatigue. Using Jancy’s Slugger cutters, the JM101 accurately drills burr-free holes up to 1-3/8” in diameter through two inches of carbon steel in mere seconds. A patented arbor system provides optimal pilot tension for predrilling alignment and positively ejects the slug after the cut. The height (16-1/4”) is ideal for steel fabricators, contractors and maintenance workers drilling holes in hard-to-reach locations. The rugged cast aluminum frame and motor housing offer years of proven reliable service. Improved magnetic holding force secures the machine to the work surface, increasing stability when drilling. Operation is controlled by a user-friendly rear-mounted control panel.
Specifications: Height: 16-1/4 inches
Width: 7-1/2 inches with handles
Length: 9-3/8 inches
Weight: 28 lbs.
Drill Motor: 120v, 1 ph 50/60 Hz
No Load Speed: 450 RPM
Drill Point Breakaway: 650 lbf
Arbor Bore: ¾ inch
Maximum Slugger Cutter Diameter: 1-3/8 inch
Depth of Cut: 2” standard
Twist Drill Capacity: 1/8 to ½ inch
With Chuck and Adapter: 3” stroke, 5” chuck face to material
C/L Pilot to Motor Face: 1-1/4 inch
RSC # Vendor Part Number Description Unit of Measure Brand Names
07601000 19020 SLUGGER JM101 EA Jancy Engineering
Share |

Related Products:

  1. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  2. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  3. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  4. Slugger Cutters, ¾” Diameter Shank Drives Save time and reduce cost by...
  5. Slugger Industrial Arbor, #3MT Jancy’s industrial arbors are designed to...

5” Angle Grinder, #9005B

5” Angle Grinder, #9005B
5” Angle Grinder, #9005B
 This double-insulated grinder features a powerful motor for high production work that is still lightweight enough to reduce fatigue. It has a removable side handle that can be installed on either side, and a shaft lock for easy accessory changes. Other features include AC/DC lock-on switch, a ball bearing construction and a standard 5/8” – 11 UNC spindle. Kit includes a grinding wheel, wheel guard, side handle, inner flange, lock nut, lock nut wrench and spindle washer.
Specifications: Grinding Wheel: 5” (125 mm)
Wire Cup Brush: 3-1/2” (89 mm)
Sanding Disc: 5” (127 mm)
No Load Speed: 10,000 RPM AMPs (115V) 9.0
Spindle Thread: 5/8” – 11 UNC
Overall Length: 14” (356 mm)
Net Weight: 6.6 lbs. (3.0 kg)
Shipping Weight: 9.3 lbs. (4.2 kg)
RSC # Vendor Part Number Description Unit of Measure Brand Names
06902150 9005B DISC GRINDER 5″ EA Makita USA
Share |

Related Products:

  1. 4-1/2” Disc Grinder, #9503BHZ  This powerful double-insulated machine has a...
  2. 4” Disc Grinder, #N9514B  This powerful machine has an extra-powerful...
  3. Angle Sander, #GA7911  Features an all ball and needle...
  4. WPS7-115 Quick Angle Grinder, 4-1/2″ Metabo’s angle grinders have a number...
  5. WP7-115 Quick Angle Grinder, 4-1/2″ Metabo’s angle grinders have a number...

Angle Sander, #GA7911

Angle Sander, #GA7911
Angle Sander, #GA7911
 Features an all ball and needle bearing construction and rugged housing for long life, with an extra-heavy-duty motor for high production and continuous use. It operates at 6,000 RPM for optimum material removal, with an AC/DC switch for using alternative power sources. It can accept 7” or 9” wheels (with proper guards) and has a removable side handle that can be right- or left-mounted. The standard 5/8” – 11 UNC spindle accomodates various accessories, and locks for easy wheel changes. The entire kit includes a side handle and spindle washer.
Specifications: Grinding Wheel: 7” or 9” (180 mm or 230 mm)
Wire Cup Brush: 6” (150 mm)
Sanding Disc: 7” (180 mm)
No Load Speed: 6,000 RPM
AMPs (115V): 15.0
Spindle Thread: 5/8” – 11 UNC
Overall Length: 16-1/4” (411.5 mm)
Net Weight: 12.2 lbs. (5.5 kg)
Shipping Weight: 16.0 lbs. (7.2 kg)
RSC # Vendor Part Number Description Unit of Measure Brand Names
06902120 GA7911 ANGLE SANDER AC/DC EA Makita USA
Share |

Related Products:

  1. 5” Angle Grinder, #9005B  This double-insulated grinder features a powerful...
  2. 4-1/2” Disc Grinder, #9503BHZ  This powerful double-insulated machine has a...
  3. 4” Disc Grinder, #N9514B  This powerful machine has an extra-powerful...
  4. 5” Magnum Sander/Grinder, #6149-20 The 6149-20 5-inch 8.5-amp grinder is...
  5. 4-1/2” Magnum Sander/Grinder, #6148-30 The 6148-30 Magnum Series 4-1/2-inch 8.5-amp...

18-Gauge Shear, #6852-20

18-Gauge Shear, #6852-20
18-Gauge Shear, #6852-20
Milwaukee’s #6852-20 shear from Milwaukee comes with a powerful 6.8-amp motor. Its ergonomic tactile grip is designed for greater user comfort, allowing you to make that straight cut with no problem! A variable-speed trigger (0-2500 SPM) allows for smoother acceleration and performance when needed. The shear is packaged in a lightweight, heavy-duty magnesium gear-case.
Specifications: ADDITIONAL DETAILS
· 6.8 amps, trigger speed control: 0-2,500 rpm spindle speed.
· 360 degree swivel head.
· Ergonomic tactile grip for optimal user comfort.
· 10 ft. flexible, durable runner cord.
RSC # Vendor Part Number Description Unit of Measure Brand Names
08306850 6852-20 (6850) SHEAR WORLD DRILL 18-GAUGE EA Milwaukee Electric
Share |

Related Products:

  1. 14-Gauge Shear, #6815 This fast-cutting 14 Gauge shear can...
  2. Special Screw-Shooter, #6790-20 This drill is the Ideal product...
  3. Shear Blade Set, #48-44-0112 This 14 gauge Shear blade set...
  4. Special Screw-Shooter, #6790-20 This drill is the Ideal product...
  5. ½” Magnum Drill, #0299-20 This heavy-duty Magnum drill has the...

4” Disc Grinder, #N9514B

4” Disc Grinder, #N9514B
4” Disc Grinder, #N9514B
 This powerful machine has an extra-powerful motor and a high power-to-weight ratio to increase production, and an overload protector to prevent motor burnout. The construction features all ball bearings for long life. In addition, it has a removable side handle, and is double-insulated. Kit includes a depressed center wheel, wrench, lock nut wrench, side handle, wheel guard, grip holder, inner flange and lock nut.
Specifications: Grinding Wheel: 4” (100 mm)
Wire Cup Brush: 3” (76 mm)
Sanding Disc: 4” (100 mm)
No Load Speed: 11,000 RPM AMPs (115V) 5.0
Spindle Thread: M10 x 1.25
Overall Length: 10” (255 mm)
Net Weight: 3.3 lbs. (1.5 kg)
Shipping Weight: 5 lbs. (2.3 kg)
RSC # Vendor Part Number Description Unit of Measure Brand Names
06902125 9527PB ANGLE GRINDER 4-1/2″ EA Makita USA
Share |

Related Products:

  1. 5” Angle Grinder, #9005B  This double-insulated grinder features a powerful...
  2. 4-1/2” Disc Grinder, #9503BHZ  This powerful double-insulated machine has a...
  3. W14-150 Ergo Angle Grinder, 6″ Deadman Metabo’s angle grinders have a number...
  4. Angle Sander, #GA7911  Features an all ball and needle...
  5. WPS7-115 Quick Angle Grinder, 4-1/2″ Metabo’s angle grinders have a number...

  • A B C D E F G H I J K L M N O P Q R S T U V W X Y Z



plugin by DynamicWP
#
WordPress design by New York Web Design - WhatsTheBigIdea.com